×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

SB2164

Snowblowers

  • Discharge chute deflection
  • Field-installed drift cutters kits
  • Discharge chute rotation as base equipment
  • Torque-controlled impeller moves snow easily

View Product Brochure



Features



Optional hydraulic cylinder controls chute Optional hydraulic cylinder controls chute

Manual adjustment of the chute angle on the spout is standard equipment on the SB21 Series Loader-Mounted Snowblowers.

 

An optional electrically controlled hydraulic cylinder is available to adjust the deflector angle.

 

The chute rotation and optional chute angle adjustment are powered by the hydraulic power pack and controlled with rocker switches installed in the tractor operator station.

Electrically controlled hydraulic motorElectrically controlled hydraulic motor

As base equipment on SB21 Series Loader-Mounted Snowblowers, the discharge chute rotation is controlled with an electrically controlled hydraulic motor.

The chute rotation is powered by the hydraulic power pack and controlled with a rocker switch installed in the tractor operator station.

Self-contained hydraulic systemSelf-contained hydraulic system
#

The SB21 Series Loader-Mounted Snowblower's hydraulic three-point power packs are self-contained and powered by the tractor's rear power take-off (PTO). They are Category 1 and iMatch™ quick-hitch compatible.

  • HP2025 Hydraulic Power Pack is required for model SB2164 Snowblower.
  • HP2134 Hydraulic Power Pack is required for model SB2176 Snowblower.

Add suitcase weights (shown above) for additional ballast to the rear of the tractor.

Reduces plugging in heavy snowReduces plugging in heavy snow

Frontier™ SB21 Series Loader-Mounted Snowblowers monitor the torque applied to the impeller, which is an industry-exclusive feature.

 

The speed of the auger slows down when maximum torque is sensed, alerting the operator to slow ground speed. This allows the impeller to move away excess snow.

 

This feature reduces plugging during operation.   

193-cm (76-in.) working width shown193-cm (76-in.) working width shown

The SB21 Series Loader-Mounted Snowblowers come in a 162.6-cm or 193-cm (64-in. or 76-in.) working width, a 152.4-cm or 68.6-cm (60-in. or 27-in.) working height, and a 38.1-cm (15-in.) diameter auger. These features make quick work of snow-removal jobs.

Steel skid shoes are adjustable and replaceable. The cutting edge is also replaceable.

The field-installed drift cutter kits are used when snow is taller than the blower. It directs tall snow down to the snowblower, where it can be redirected.

 

NOTE: For SB1388R, SB1388, SB1308, SB1308R, SB1392 and SB1392R Three-Point Snowblowers, and SB2164 and SB2176 Loader-Mount Snowblowers.

Chute deflector and rotation kits allow the operator to change the direction of snow exiting the chute. 

Specifications


Dimensions SB2164
Current Model
Snow blower working width163 cm
64 in.
Power pack width97 cm
38 in.
Snow blower machine height152 cm
60 in.
Power pack height132 cm
52 in.
Weight
Snow blower operating363 kg
800 lb
Power pack operating243 kg
535 lb
Snow blower shipping476 kg
1,050 lb
Power pack shipping243 kg
535 lb
Tractor compatibility
PTO horsepower18.6-25.4 kW
25-34 hp
PTO rpm540 rpm
Loader (current John Deere series)300
Chute
TypeTwo-part
Deflector adjustment (standard)Manual
Deflector adjustment (optional)Hydraulic cylinder
Rotation typeHydraulic
Diameter21 cm
8.25 in.
Auger
Diameter38 cm
15 in.
Speed, rpm200 rpm
TypeSingle
Flighting thickness1 cm
0.3125 in.
Impeller
BladesFour
Diameter61 cm
24 in.
Width18 cm
7 in.
Speed, rpm680 rpm
Impeller shaft diameter3 cm
1.25 in.
Hydraulics
Fan relief valve setting207 bar
3000 psi
Auger relief valve setting138 bar
2000 psi
Oil coolerStandard
Flow @ 3000 psi (207 bar)At 207 bar: 133.60 L/min
At 3000 psi: 16 gpm
Power pack reservoir56.8 L
15 gal.
System capacity68.1 L
18 gal.
Cutting edge
TypeReplaceable, reversible
Thickness1 cm
0.375 in.
Width5.1 cm
2 in.
Skid shoes
ConfigurationAdjustable, six positions
ReplaceableStandard
Drift cutters
Construction
End plate thickness0.47 cm
0.1875 in.
Back plate thickness0.3 cm
0.12 in.
Fan housing thickness0.3 cm
0.12 in.
Fan blade thickness0.64 cm
0.25 in.
Side panel bottom thickness1.27 cm
0.5 in.
Shipping
Set-up time
Warranty