×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

22B INTEGRAL RIPPER

Integral Ripper

  • Regular and capped ripper points
  • LaserRip™ Extreme points
  • Mole ball is used to make a tunnel drainage system
  • Heavy-duty knife

View Product Brochure



Features



A single parabolic standard ripper provides an economical means of shattering hardpan soil by exploding the soil upward to promote root growth:

  • Curved standard is less likely to slice through marginally moist soils than a straight standard
  • Mole ball can be attached to the standard to help drain wet soils by leaving a small tunnel under the soil
  • V-knife can be attached to the standard to effectively cut the root systems
  • Improves water percolation into the subsoil zone

Two sizes of standards are available:

  • 25 mm x 686 mm (1 in. x 27 in.)
    • Maximum working depth of 406 mm (16 in.)
  • 32 mm x 838 mm (1.25 in. x 33 in.)
    • Maximum working depth of 559 mm (22 in.)

Both standards are protected for up to 6364 kg (14,000 lb) of operating force by a 16-mm (5/8-in.) shear bolt.

The 22B In-Line Ripper attaches to the tractor's 3-point hitch:

  • 25-mm x 686-mm (1-in. x 27-in.) standard model is compatible with Category 1, 3-point hitch tractors.
  • 32 mm x 838 mm (1.25 in. x 33-in.) standard model is compatible with Category 2 or 2/3N tractors with or without Quik-Coupler
    • 16.9-30 or larger rear tractor tires are recommended

Specifications


Key Specs 22b-integral-ripper
Current Model
Working width
Transport width
Operating depthMaximum
406 to 559 mm
16 to 22 in.
Miles per hour
Horsepower per standardWith 3-point hitch: 53 to 165 engine kW
39.5 to 123 engine hp
Spacings
Tool configuration
TypeV-ripper
Option 1Integral ripper
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Working width
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Transport width
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Operating depth
Frame
Size
Maximum underframe clearance
Operating speed
Horsepower required
Depth control
Option 1
Option 2
Option 3
Hydraulic requirements
Option 1
Option 2
Hitch
Options
Three-point hitch requirementsCategory 1, 2, or 3/N without Quik-Coupler for standard: 686 mm
27 in.
Category 2 or 2/3N with or without Quik-Coupler for standard: 838 mm
33 in.
16.9-30 or larger rear tractor tires are recommended
Pull-type description
Standard options
Spacings
Option 1
Standard type
Parabolic
Standard: 32x686 mm
1.25x27 in.
Penetration: 406 mm
16 in.
Option 2
Standard type
Parabolic
Optional: 32x838 mm
1.25x33 in.
Penetration: 559 mm
22 in.
Option 3

Option 4

Coulters
Description
Type
Pounds of force
BladesHigh-carbon steel: 76x10 mm
3x0.375 in.
Long: 610 mm
24 in.
Closing wheel attachment
Description
Down force
Size
Spacing
Angle adjustments
Stabilizer/gauge wheels
Type
Wheels
Tires
Pull-type wheels
Description
Additional feature
Option 1
Option 2
Option 3
Option 4
Ground-engaging components

Accessories and Attachments

Hitch

For Category 2 and 2/3N Tractors with Quik-Coupler, order AR27093.

 

For Category 2/3N Tractors without Quik-Coupler, order one R64434 and two R66435.

For Category 2 and 2/3N Tractors with Quik-Coupler, order AR27093.

 

For Category 2/3N Tractors without Quik-Coupler, order one R64434 and two R66435.

Standards

Standards may be ordered to convert the machine for different operational requirements. In the sales manual, see tractor compatibility and equipment requirements for restrictions.

To convert from a 25-mm x 686-mm (1-in. x 27-in.) standard to a 32-mm x 838-mm (1.25-in. x 33-in.) standard, order N261789.
 
To convert from a 32-mm x 838-mm (1.25-in. x 33-in.) standard to a 25-mm x 686-mm (1-in. x 27-in.) standard, order N261788 and A25273.

Standards may be ordered to convert the machine for different operational requirements. In the sales manual, see tractor compatibility and equipment requirements for restrictions.

To convert from a 25-mm x 686-mm (1-in. x 27-in.) standard to a 32-mm x 838-mm (1.25-in. x 33-in.) standard, order N261789.
 
To convert from a 32-mm x 838-mm (1.25-in. x 33-in.) standard to a 25-mm x 686-mm (1-in. x 27-in.) standard, order N261788 and A25273.

Standards Attachments

Heavy-duty knifeHeavy-duty knife

The heavy-duty knife attaches to the lower end of the standard to open up the sub-soil and shear the roots.
 
Each knife is 610 mm (24 in.) long and will cut 267 mm (10.5 in.) on each side of the standard.
 
The 76-mm x 8-mm (3-in. x 5/16-in.) blades are sharpened on the leading edge.

Mole ballMole ball

The mole ball is used to make a tunnel drainage system. It requires BA24894 standard support attachment.

Standard support attachmentStandard support attachment

The standard support attachment is required to attach the mole ball to the standard. It also allows the frame to jackknife for automatic retraction and operation of the standard.