![](img/equip_images/995-reversible-plow_SEOVAL.jpg)
995 REVERSIBLE PLOW
Reversible Plow
- Moldboard frame pivots with the bottoms
- Plastic moldboard and steel shins
- Landsides with wedges
- Front gauge wheels
View Product Brochure
Features
![995 mainframe](https://salesmanual.deere.com/sales/salesmanual/images/NA/primary/features_attachment/995plow/995_mainframe.jpg)
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
![Moldboard frame](https://salesmanual.deere.com/sales/salesmanual/images/NA/primary/features_attachment/995plow/995ploa6.gif)
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
- Requires less 3-point hitch capacity
- Requires less ballasting of the tractor front end
- Eliminates initial cost and service requirements for one complete set of standards and bottoms
![Integral on-land hitch](https://salesmanual.deere.com/sales/salesmanual/images/NA/primary/features_attachment/995plow/995ploa5.gif)
![#](https://salesmanual.deere.com/sales/salesmanual/images/NA/spacer.gif)
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
- Category 3/3N Quik-Coupler compatible
- Tractor rockshaft lever controls the raising and lowering of the plow
- Maximum plowing depth to 356 mm (14 in.)
- Provides ample clearance between the tractor tires and the plow
![Front gauge wheels](https://salesmanual.deere.com/sales/salesmanual/images/NA/primary/features_attachment/995plow/995_front_gauge_wheels.jpg)
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
![995 Moldboard Plow rear gauge wheels](https://salesmanual.deere.com/sales/salesmanual/images/NA/primary/features_attachment/995plow/995_rear_gauge_wheels.jpg)
![#](https://salesmanual.deere.com/sales/salesmanual/images/NA/spacer.gif)
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
- Equipped with 6.70-15 tires for good flotation
- Easy turnbuckle adjustment on rear gauge wheel
- Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
Specifications
Compare the specifications of up to 4 models
Key Specs | 995-reversible-plow Current Model |
---|---|
Total width of cut | |
Option 1 | 2.3 m 7.5 ft |
Option 2 | 2.7 m 9 ft |
Option 3 | 3.2 m 10.5 ft |
Option 4 | 3.7 m 12 ft |
Plowing depth | 35.6 cm 14 in. |
Horsepower required - Option 1 | 5-bottom: 96.9-123 kW 130-165 hp |
Option 2 | 6-bottom: 111.9-130.5 kW 150-175 hp |
Option 3 | 7-bottom: 130.5-149.1 kW 175-200 hp |
Option 4 | 8-bottom: 149.1-186.4 kW 200-250 hp |
Hitch | |
Type | Category 3N or 3 |
Steering | Integral, in-furrow No Integral, on-land Yes Semi-integral, on-land No Drawn, in-furrow No Drawn, on-land No Quick-coupler compatible Yes |
Reversible | Type of reversing Hydraulic cylinder Yes |
No. of bottoms | |
Option 1 | 5 |
Option 2 | 6 |
Option 3 | 7 |
Option 4 | 8 |
Option 5 | |
Option 6 | |
Option 7 | |
Option 8 | |
Total width of cut | |
Adjustment | |
Option 1 | 2.3 m 7.5 ft |
Option 2 | 2.7 m 9 ft |
Option 3 | 3.2 m 10.5 ft |
Option 4 | 3.7 m 12 ft |
Option 5 | |
Option 6 | |
Option 7 | |
Option 8 | |
Weight (approximate) | |
Option 1 | 1,678 kg 3,700 lb |
Option 2 | 1,860 kg 4,100 lb |
Option 3 | 2,041 kg 4,500 lb |
Option 4 | 2,440 kg 5,368 lb |
Option 5 | |
Option 6 | |
Option 7 | |
Option 8 | |
Clearances | |
Vertical | 81.3 cm 32 in. |
Fore-aft | |
Standards | |
Shearbolt | Standard |
Safety trip | Optional |
Spring reset | No |
Hydraulic | No |
Coulters | |
Option 1 | |
Option 2 | |
Option 3 | |
Bottoms | |
Option 1 | Plowing depth 35.6 cm 14 in. Steel moldboard |
Option 2 | Plastic moldboard |
Option 3 | |
Option 4 | |
Option 5 | |
Option 6 | |
Frame | |
Option 1 | Thickness: 17.8x10.2x0.8 cm 7x4x0.313 in. |
Option 2 | |
Option 3 | |
Expandable | |
Horsepower required | |
Option 1 | 5-bottom: 96.9-123 kW 130-165 hp |
Option 2 | 6-bottom: 111.9-130.5 kW 150-175 hp |
Option 3 | 7-bottom: 130.5-149.1 kW 175-200 hp |
Option 4 | 8-bottom: 149.1-186.4 kW 200-250 hp |
Landing | |
Gauge wheel | |
Tires | |
Trashboards | |
Additional features | |